Product Description

The multi-port fiber media converter, also named unmanageable fiber switch, has similar functions as normal fiber media converter, when you use the converter, all the data from different ports can be shared, realizing the data sharing. It is suitable for the intelligent community; it extends the network transmission from 100m to 120 km.Also it can realize the interconnection between motherboard server, Repeaters, hubs, switches, terminal. Plug and play design makes easy installation, no on-site adjustment, All the light, electricity interfaces are in line with international standards, products applicable to different harsh industrial environments. The installation and operation procedures of the Fiber Optic Media Converter are simple and straightforward. Operation status can be monitored through a set of Diagnostic LEDs located in the front panel. Since the data rate is auto-negotiated, no internal adjustments or settings are necessary. Standard shielded RJ-45 connectors are provided for Cat. 5 compliances. 

Features

1. Supports 10/100/1000Base-T, 1000Base-X protocol.
2. Flow control for full duplex and half duplex.
3. Supports up to 10k byte JUMBO frames.
4. Supports Fiber Port Trunking, Increasing Fiber Channel Bandwidth and Supply Fiber Channel Redundancy.
5. Supports Ports Based VLANS and TAG Based VLANS.
6. In conformity to the safety code of FCC and CE MARK.
7. Connector: Multi-UTP RJ-45connector, one or two fiber connector
8. Operation mode: full duplex mode or half duplex mode
9. Power supply parameter: DC 5V 1A/2A
10. Environmental temperature: 0-50?
11. Relative humidity: 5%-90%
12. UTP cable: Cat5 UTP cable
13. Transfer fiber: multimode(50/125, 62.5/125 or 100/140um); single mod( 8.3/125,8.7/125, 9/125 or 10/125um).